* All product’s images are illustrative.

DPM MS-SI/26 Sig Sauer P365 XL Barrel Length 3.7" - 8 User Ajustible Settings

DPM MS-SI/26 Sig Sauer P365 XL (X-Series) Barrel Length 3.7″ (94 mm). - 8 User Ajustible Settings

Brand: DPM

107.15 €


DPM MS-SI/26 Sig Sauer P365 XL (X-Series) Barrel Length 3.7″ (94 mm). - 8 User Ajustible Settings

DPM MECHANICAL RECOIL REDUCTION SYSTEM

8 Adjustable User Settings

The DPM Recoil Reduction System works due to the multi-spring intricate rod (three springs) effects like a brake on the slide, but only before stopped on the frame to the last 6 to 8 millimeters of the movement.

The system includes 4 external springs, the external springs are different in length (also in power) so the user can fine tune the pistol on the opening and locking positions (slide on the battery) according to his/hers personal standards. The longer spring (more coils) is stronger and has a heavier pound rating than the shorter springs.

The system includes also two different spring plugs. The spring plug with the marked groove is offering a heavier buffer effect and the spring plug with flat surface offers a lighter buffer effect (slide full open position).


Overall Advantages
• Faster follow up shots
• Improved firing speed
• Slide and Frame Protection
• Elimination of jams
• Significant recoil reduction
• Better double-tap concentration
• Better control and greater accuracy

System of Multiple Springs
Three or more springs of different sizes for specific compression, housed in a metal tube. The mission of the system is the control of the backward motion of the slide at the moment of the bullet's firing. The initial pressure, that the total of the system exhibits, is almost the same with the standards of the factorial springs. But at the final phase of the system's coiling the difference of pressure that is exerted on the slide is in the order of 80% - 100% more. Consequently, the slide never rams against the frame and jams are eliminated.

Materials
All metal elements: stainless steel W.-Nr./Grade 1.4301 (AISI 304) - made in a factory compliant to ISO9000.

All Springs are made of steel or high carbon steel with a cadmium (Cd) finish *.

*The cadmium finish (which adds considerable cost to the manufacturing process) makes the spring impervious to the elements (including salt water).

*B.O.S.S. : Black Oxide Stainless Steel  (only the visible parts of the recoil system).

DPM Code: MS-SI/26

You might also like